Akademik Bilgiler



GÖZDE İNAN SEZER
DOÇENT
Mühendislik Fakültesi
İnşaat Mühendisliği Bölümü
Yapı AnaBilim Dalı
Contact Information- E-posta: gozde.sezer@ege.edu.tr
- Telefon: 0(232)3886026-5177
Academic Degree Information- Lisans: Ege Üniversitesi, İnşaat Mühendisliği, Türkiye, 1998
- Yüksek Lisans: Ege Üniversitesi, İnşaat Mühendisliği, Türkiye, 2002
- Doktora: Ege Üniversitesi, İnşaat Mühendisliği, Türkiye, 2007
- Yardımcı Doçentlik: Ege Üniversitesi, Mühendislik Fakültesi, Türkiye, 2007
- Doçentlik: Ege Üniversitesi, Türkiye , 2012

Administrative / Academic Duties (4 entries)- Danışmanlık işleri ve araştırma projeleri komisyonu üyesi, 2012-
- Öğretim Üyesi, 2007-
- Bölüm öğrenci işleri otomasyon sorumlusu, 2004-2008
- Araştırma Görevlisi, 1999-2007
Research Interests- Malzeme Bilimi (6040200)
- Yapı Malzemesi (6240301)
Indexed Journal Publications (27 entries)- 2016, Ş. Yazici, G. İnan Sezer, Alper Sezer, Prediction of impact resistance properties of concrete using radial basis function networks, Indian Journal of Materials and Engineering Sciences, Accepted.
- 2016, İ. Kalıpcılar, A. Mardani-Aghabaglou, G. İnan Sezer, S. Altun, A. Sezer, Assessment of the effect of sulfate attack on cement stabilized montmorillonite, Geomechanics and Engineering, Accepted.
- 2015, G.İ. Sezer, M. Gülderen “Usage of steel slag in concrete as fine and/or coarse”, Indian Journal of Materials and Engineering Sciences, 22 (3): 339-344.
- 2015, G.İ. Sezer, Ş. Yazıcı, A. Sezer, “Evaluation of hgh temperature effects on concrete-reinforcement bar bond using automated digital image processing”, Indian Journal of Materials and Engineering Sciences, 22: 581-586.
- 2015, G.İ. Sezer, Ş. Yazıcı, A. Sezer, “Dependence of impact resistance of steel fiber reinforced concrete on aggregate”, Acta Physica Polonica A, 128: 37-39.
- 2015, A. Mardani-Aghabaglou, İ. Kalıpcılar, G. İ. Sezer, A. Sezer, S. Altun, Freeze-thaw resistance and chloride-ion penetration of cement-stabilized clay exposed to sulfate attack, Applied Clay Sciences, 115: 179-188.
- 2015, G.İ. Sezer, Ş.Yazıcı, Polimer katkılı harçlarda farklı kür koşullarının dayanıma etkisi, Celal Bayar Üniveristesi Fen Bilimleri Dergisi, 11(2): 195-201.
- 2014, A. Mardani-Aghabaglou, G.İnan Sezer, K. Ramyar, Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point, Construction and Building Materials, 70: 17–25.
- 2012, G. İ. Sezer, Compressive strength and sulfate resistance of limestone and/or silica fume mortars, Construction and Building Materials, 26 (1): 613-618.
- 2012, Ş. Yazıcı, G. İ. Sezer, H. Şengül, The effect of high temperature on the compressive strength of mortars, Construction and Building Materials, 35: 97-100.
- 2010, G. İ. Sezer, O. Çopuroğlu, K. Ramyar, Microstructure of 2 and 28-day cured Portland limestone cement pastes, Indian Journal of Engineering & Materials Sciences, 17 (4): 289-294.
- 2008, Ş. Yazıcı, G. İ. Sezer, Effect of elevated temperatures and time on compressive and tensile properties of concretes, Indian Journal of Engineering & Materials Sciences, 15 (1): 23-28.
- 2008, A.B. Göktepe, A. Sezer, G. İ. Sezer, K. Ramyar, Classification of time-dependant unconfined strength of fly ash treated clay, Construction and Building Materials, 22 (4): 675-683.
- 2008, G. İ. Sezer, K. Ramyar, B. Karasu, A. B. Göktepe, A. Sezer, Image analysis of sulfate attack on hardened cement paste, Materials & Design, 29 (1): 224-231.
- 2008, Ş.Yazıcı, G.İ. Sezer, Çelik lifli betonların darbe direncine agrega maksimum boyutunun etkisi, Pamukkale Üniversitesi Mühendislik Fakültesi Mühendislik Bilimleri Dergisi, Cilt 14, Sayı.3, 237-245.
- 2007, G. İnan, A.B. Göktepe, K. Ramyar, A. Sezer, Prediction of sulfate expansion of PC mortar using adaptive Neuro-Fuzzy methodology, Building and Environment, 42 (3): 1264-1269.
- 2007, K. Ramyar, G. İnan, Sodium sulfate attack on plain and blended cements, Building and Environment, 42 (3): 1368-1372 pp.
- 2007, Ş. Yazıcı, G. İnan, V. Tabak, Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC, Construction and Building Materials, 21 (6): 1250-1253.
- 2007, Ş. Yazıcı, G. İ. Sezer, The effect of cylindrical specimen size on the compressive strength of concrete, Building and Environment, 42 (6): 2417-2420.
- 2007, Ş.Yazıcı, G.İ. Sezer, Abrasion resistance estimation of high strength concrete, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Cilt 13, Sayı.1, 1-6.
- 2007, A.B.Göktepe, A.Sezer, G.İ.Sezer, K.Ramyar, Determination of sulfate resistance level of cements using unsupervised clustering algorithms, Cement and Concrete World, V.12, Sayı. 67, 44-55.
- 2006, A. Sezer, G. İnan, H.R. Yılmaz, K. Ramyar, Utilization of a very high lime fly ash for improvement of Izmir clay, Building and Environment, 41(2): 150–155 pp.
- 2006, Ş. Yazıcı, G. İnan, An investigation on the wear resistance of high strength concretes, Wear, 260 (6): 615-618.
- 2006, A.B. Göktepe, G. İnan, K. Ramyar, A. Sezer, Estimation of sulfate expansion level of PC mortar using statistical and neural approaches, Construction and Building Materials, 20 (7): 441-449.
- 2006, Ş. Yazıcı, G.İ. Sezer, K. Ramyar, Effect of capping material on the uniformity of concrete strength test results, Cement and Concrete World, V. 11, Sayı. 62, 64-70.
- 2005, G. İnan, A. Sezer, K. Ramyar, H.R. Yılmaz, Değişik uçucu küllerin yüksek plastisiteli kilin serbest basınç dayanımına etkisi, Selçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi Cilt 20, Sayı.1, 19–25.
- 2005, Ş.Yazıcı, G. İnan, İnce agreganın bir kısmı yerine volkanik cüruf kullanımının beton özelliklerine etkisi, Anadolu Üniversitesi Bilim ve Teknoloji Dergisi Cilt 6, Sayı.2, 197–202.

Publications in Non-Indexed Journals (1 entries)- 2012, G. İ. Sezer , A. B. Göktepe, A. Sezer, K. Ramyar, F. T. Dilek, M. Tuyan, Cement type and the sulfate resistance of PC mortar, Awer Procedia Information Technology & Computer Science, 1: 572-577.

International Conference Proceedings (13 entries)- 2015, Ş. Yazıcı, G.İ. Sezer, A. Sezer, Prediction of concrete class using impact resistance and mechanical properties, International Porous and Powder Materials Symposium & Exhibition, Turkey, 18 Eylül, Çeşme, İzmir. CDROM.
- 2015, Ş. Yazıcı, G.İ. Sezer, The relationship between compressive strength and ultrasonic pulse velocity according to surface texture and testing curing time, International Porous and Powder Materials Symposium & Exhibition, Turkey, 18 Eylül, Çeşme, İzmir. CDROM.
- 2015, Ş. Yazıcı, G.İ. Sezer, A. Sezer, Modeling properties of SFRC by unsupervised clustering algorithms, 2nd International Conference on Computational and Experimental Science and engineering, Antalya, Turkey, October 14-19, CDROM.
- 2015, A. Mardani-Aghabaglou, İ. Kalıpcılar, S. Altun, G. İ. Sezer, A. Sezer, “Comparison of unidimensional expansion levels of kaolinite stabilized with different types of cements”, International Symposium on Shrink-Swell Processes in Soils, Climate and Construction, Marne La Valée, Fransa, 18-19 Haziran, s. 151-160.
- 2015, İ. Kalıpcılar, A. Mardani-Aghabaglou, A. Sezer, G. İ. Sezer, S. Altun, “Unconfined compressive strength, chloride-ion penetration and freezing-thawing resistance of cement stabilized clay”, International Conference on Civil and Environmental Engineering, Kapadokya, Türkiye, 20-23 Mayıs, s.1658-1665.
- 2015, G. İ. Sezer, Ş. Yazıcı, “Effect of aggregate maximum size on properties of fiber reinforced concrete”, International Conference on Civil and Environmental Engineering, Kapadokya, Türkiye, 20-23 Mayıs, Poster.
- 2014, G. İ. Sezer, Ş. Yazıcı, A. Sezer, “Effect of aggregate type on mechanic and dynamic properties of fiber reinforced concretes”, International conference on computational and experimental science and engineering, Antalya, Turkey, October 25-29, CDROM.
- 2011, G. İ. Sezer, A. B. Göktepe, A. Sezer, K. Ramyar, F. T. Dilek, M. Tuyan, “Investigation of the effect cement type on the sulfate resistance of pc mortar by use of clustering algorithms”, 2nd World Conference on Information and Technology, Antalya, Türkiye, 23-27 Kasım, CD-ROM.
- 2008, G.İ. Sezer, B. Çeneli, K. Ramyar, Properties of composite cements containing fly ash and limestone, 8th International Congress on Advances in Civil Engineering, Famogusta, North Cyprus, 189-196 pp., 15-17 September.
- 2006, Ş. Yazıcı, G.İ. Sezer, Effect of Aggregate Maximum Size and Steel Fiber Content on the Mechanical Properties of Concrete, 4th FAE International Symposium, Gemikonağı, TRNC, 163-166 pp., 30 November-1 December 2006.
- 2006, G.İ. Sezer, A.Sezer, Ş. Yazıcı, Evaluation of the Flakiness and Elongation of Aggregates Using Digital Image Processing, 4th FAE International Symposium, Gemikonağı, TRNC, 153-156 pp., 30 November-1 December 2006.
- 2006, A.B. Göktepe, A. Sezer, G.İ. Sezer, On The Use of Unsupervised Clustering Algorithms in Civil Engineering Practice, Seventh International Congress on Advances in Civil Engineering, Istanbul, Turkey, 1-10 pp., 11-13 October
- 2003, K.B.Bozdoğan, E.Kaya, A.Sezer, G.İnan, P.Aklık, The Effect of Foundation Flexibility of A Shear Wall System in Dynamic Analysis, Int. Conference on New Developments in Soil Mechanics and Geotechnical Engineering, pp.111–118, Lefkoşa, TRNC.

National Conference Proceedings (7 entries)- 2015, İ. Kalıpcılar A. Mardani-Aghabaglou, G. İ. Sezer, A. Sezer, S. Altun, Çimento stabilize kilin sülfat etkisi altında dayanım ve geçirimlilik özellikleri, 6. Geoteknik Sempozyumu, 26-27 Kasım, Adana, CDROM.
- 2005, Ş.Yazıcı, G.İnan, Yüksek mukavemetli betonlarda sülfat ve tuz etkisi, Uluslararası Katılımlı Kıyı Mühendisliği V. Ulusal Sempozyumu, 2. Cilt, s. 283–292, 5–7 Mayıs 2005, Bodrum, Türkiye.
- 2005, A. Sezer, G. İnan, R. Daneshfaraz, Trapez kesitli açık kanallardaki kararsız akımların sayısal çözümlerinin karşılaştırılması, II. Ulusal Su Mühendisliği Sempozyumu, 21–24 Eylül, Gümüldür, s.661-671.
- 2005, A. Sezer, G. İnan, R. Daneshfaraz, Dikdörtgen kesitli açık kanallarda oluşan kararsız akımların değişik metotlarla çözümü, II. Ulusal Su Mühendisliği Sempozyumu, 21–24 Eylül, Gümüldür, s. 399-409.
- 2004, G.İnan, O.E.Köseoğlu, K.Ramyar, Süper Akışkanlaştırıcı Katkının Betonun Su İhtiyacına ve Basınç Dayanımına Etkisi, Beton 2004 Kongresi, s. 674–681, 10–12 Haziran 2004, İstanbul, Türkiye.
- 2003, G.İnan, A.Sezer, Zemin İyileştirme Yöntemleri ve Kullanılan Malzemeler Üzerine Bir İnceleme, Mühendislik Bilimleri Genç Araştırmacılar I. Kongresi, s.369–376, 17–20 Şubat 2003, İstanbul, Türkiye.
- 2002, K.Ramyar, G.İnan, Çimento Sülfat Direncinin Değişik Test Metotlarıyla İncelenmesi, IV. Ulusal Kıyı Mühendisliği Sempozyumu, 1. Cilt, s.291–303, 24–27 Ekim 2002, Antalya, Türkiye.

Number of References1 times self referenced.
143 times referenced by other.
Referrer Publications (144 entries)- 2013, Dutra, VFP, Maghous, S, Campos, A, A homogenization approach to macroscopic strength criterion of steel fiber reinforced concrete, CEMENT AND CONCRETE RESEARCH, 44: 34-45.
- 2013, Yazici, S, Arel, HS, The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs, CONSTRUCTION AND BUILDING MATERIALS, 40: 299-305.
- 2013, Michels, J, Christen, R, Waldmann, D, Experimental and numerical investigation on postcracking behavior of steel fiber reinforced concrete, ENGINEERING FRACTURE MECHANICS, 98: 326-349.
- 2013, Barauskas, I, INFLUENCE OF POZZOLANA ON THE HYDRATION OF C(4)AF RICH CEMENT IN CHLORIDE ENVIRONMENT, CERAMICS-SILIKATY, 57 (1): 45-52.
- 2013, Deneme, IO , Estimation of modal damping ratio of impact-damped flexible beams using ANFIS, NEURAL COMPUTING & APPLICATIONS, 23(6): 1669-1676.
- 2013, Olgun, M, Effects of polypropylene fiber inclusion on the strength and volume change characteristics of cement-fly ash stabilized clay soil, GEOSYNTHETICS INTERNATIONAL, 20(4): 263-275.
- 2013, Wang, DX, Abriak, NE, Zentar, R, Co-valorisation of Dunkirk dredged sediments and siliceous-aluminous fly ash using lime, ROAD MATERIALS AND PAVEMENT DESIGN, 14(2): 415-431.
- 2013, Estabragh, AR, Pereshkafti, MRS, Parsaei, B, Javadi, AA, Stabilised expansive soil behaviour during wetting and drying, INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 14(4): 418-427.
- 2013, Liu, C, Tang, C, Shi, B, Suo, WB, Automatic quantification of crack patterns by image processing, COMPUTERS & GEOSCIENCES, 57: 77-80.
- 2013, Xu, H, Zhao, YX, Cui, L, Xu, B, Sulphate attack resistance of high-performance concrete under compressive loading, JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A ,14(7): 459-468.
- 2013, Yuan, HF, Chen, HS, Quantitative solution of size and dosage of capsules for self-healing of cracks in cementitious composites, COMPUTERS AND CONCRETE, 11(3): 223-236.
- 2013, Liu, KW, Deng, M, Mo, LW, Effect of Fly Ash on Resistance to Sulfate Attack of Cement-based Materials, TESTING AND EVALUATION OF ADVANCED BUILDING MATERIALS Book Series: Key Engineering Materials, Yao, W, 539: 124-129.
- 2013, Vlahovic, MM, Jovanic, PB, Martinovic, SP, Boljanac, TD, Volkov-Husovic, TD, Quantitative evaluation of sulfur-polymer matrix composite quality, COMPOSITES PART B-ENGINEERING, 44(1): 458-466.
- 2013, Sun, HF, Hohl, B, Cao, YZ, Handwerker, C, Rushing, TS, Cummins, TK, Weiss, J, Jet mill grinding of portland cement, limestone, and fly ash: Impact on particle size, hydration rate, and strength, CEMENT & CONCRETE COMPOSITES, 44: 41-49.
- 2013, Jeong, SG, Jeon, J, Cha, J, Kim, J, Kim, S, Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete, ENERGY AND BUILDINGS, 62 : 190-195.
- 2013, Toma, IO, Covatariu, D, Toma, AM, Taranu, G, Budescu, M, Strength and elastic properties of mortars with various percentages of environmentally sustainable mineral binder, CONSTRUCTION AND BUILDING MATERIALS, 43: 348-361.
- 2013, Nadeem, A, Memon, SA, Lo, TY, Mechanical performance, durability, qualitative and quantitative analysis of microstructure of fly ash and Metakaolin mortar at elevated temperatures, CONSTRUCTION AND BUILDING MATERIALS , 38: 338-347.
- 2013, Ozguven, A, Ozcelik, Y, Investigation of some property changes of natural building stones exposed to fire and high heat, CONSTRUCTION AND BUILDING MATERIALS, 38: 813-821.
- 2013, Heikal, M, El-Didamony, H, Sokkary, TM, Ahmed, IA, Behavior of composite cement pastes containing microsilica and fly ash at elevated temperature, CONSTRUCTION AND BUILDING MATERIALS, 38: 1180-1190.
- 2013, Rashad, AM, A preliminary study on the effect of fine aggregate replacement with metakaolin on strength and abrasion resistance of concrete, CONSTRUCTION AND BUILDING MATERIALS, 44: 487-495.
- 2013, Gencel, O, Koksal, F, Brostow, W, Wear minimisation in concrete with haematite, MATERIALS RESEARCH INNOVATIONS, 17(2): 92-97.
- 2013, Bywalski, C; Kaminski, M, RHEOLOGICAL STRAINS IN CONCRETE MODIFIED WITH STEEL FIBRE REINFORCEMENT, JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 19 (5):656-664.
- 2013, Baeza, FJ, Galao, O, Zornoza, E, Garces, P, Effect of aspect ratio on strain sensing capacity of carbon fiber reinforced cement composites, MATERIALS & DESIGN, 51: 1085-1094.
- 2013, Yazici, S, Arel, HS, Tabak, V, CONSTRUCTION AND BUILDING MATERIALS, 41: 68-72.
- 2013, Soulioti, DV, Barkoula, NM, Koutsianopoulos, F, Charalambakis, N, Matikas, TE, The effect of fibre chemical treatment on the steel fibre/cementitious matrix interface, CONSTRUCTION AND BUILDING MATERIALS, 40: 77-83.
- 2013, Gesoglu, M, Guneyisi, E, Alzeebaree, R, Mermerdas, K, Effect of silica fume and steel fiber on the mechanical properties of the concretes produced with cold bonded fly ash aggregates, CONSTRUCTION AND BUILDING MATERIALS, 40: 982-990.
- 2013, Aydin, S, Baradan, B, The effect of fiber properties on high performance alkali-activated slag/silica fume mortars, COMPOSITES PART B-ENGINEERING, 45(1): 63-69.
- 2013, Su, AS, Cai, YB, Influence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of Shotcrete, ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3 Book Series: Advanced Materials Research, Editor(s): Jiang, ZY; Liu, XH; Jiao, SH; Han, JT, 652-654: 1226-1232.
- 2013, Gencel, O, Ozel, C, Koksal, F, Martinez-Barrera, G, Brostow, W, Polat, H, Fuzzy Logic Model for Prediction of Properties of Fiber Reinforced Self-compacting Concrete, MATERIALS SCIENCE-MEDZIAGOTYRA, 19(2): 203-215.
- 2013, Kampmann, R, Roddenberry, M, Ping, WV, Contribution of Specimen Surface Friction to Size Effect and Rupture Behavior of Concrete, ACI MATERIALS JOURNAL, 110(2): 169-176.
- 2013, Kaminskas, R, Barauskas, I, Influence of pozzolana on sulfate attack of cement stone affected by chloride ions, MATERIALS AND STRUCTURES, Published online:15 August 2013.
- 2013, Dilmaç, H, Demir, F, Stress–strain modeling of high-strength concrete by the adaptive network-based fuzzy inference system (ANFIS) approach, NEURAL COMPUTING AND APPLICATIONS, 23 (1): 385-390.
- 2013, Kaminskas, R, Barauskas, I, Influence of pozzolana on sulfate attack of cement stone affected by chloride ions, MATERIALS AND STRUCTURES, Published online:15 August 2013.
- 2013, Kuoa WT, Liub, CC, Wang, JY, Evaluation of the sulfate resistance of fly ash and slag concrete by using modified ACMT, CONSTRUCTION AND BUILDING MATERIALS , 49: 40-45.
- 2013, Motamedi, S, Song, KI, Hashim, R, Prediction of unconfined compressive strength of pulverized fuel ash–cement–sand mixture, Materials and Structures, published online: 21 November 2013.
- 2013, Calik, U, Sadoglu, E, Classification, shear strength, and durability of expansive clayey soil stabilized with lime and perlite, Natural Hazards, published online: 13 November 2013.
- 2013, Ibrahim SF, Evaluation of Geotechnical Properties and Liquefaction Behavior of Cohesive Subgrade Soil Stabilized with Fly Ash, Gypsum and Lime, Multiphysical Testing of Soils and Shales (BOOK), Editors: Laloui, L, Ferrari, A, 323-329.
- 2013, Chunguang, M, Xiangqin, W, Mass deposition, etching and sputtering effects of low energy N+Ion Irradiation on solid fly ash, Plasma Science and Technology, 15 (12):1232-1236.
- 2013, Elkady, TY, Al-Mahbashi, AM, Soil water characteristic curves of lime-treated highly expansive soils, Advances in unsaturated soils (BOOK), Editor(s): Caicedo, B, Murillo, C, Hoyos, L, Colmenares, JE, Berdugo, IR, 231-234.
- 2013, Verma, A, Shukla, M, Sahu, AK, APPLICATION OF FUZZY LOGIC TO VISUAL EXAMINATION IN THE ASSESSMENT OF SULPHATE ATTACK ON CEMENT BASED MATERIALS, International Journal of Fuzzy Logic Systems, 3 (2): 49-61.
- 2013, Cyr, M, Influence of supplementary cementitious materials (SCMs) on concrete durability, ECO-EFFICIENT CONCRETE Book Series: Woodhead Publishing Series in Civil and Structural Engineering, Edited by: PachecoTorgal, F; Jalali, S; Labrincha, J; John, VM, 42: 153-197.
- 2013, Aydin, S, Effects of fiber strength on fracture characteristics of normal and high strength concrete, PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 57(2): 191-200.
- 2012, Michels, J, Waldmann, D, Maas, S, Zurbes, A, Steel fibers as only reinforcement for flat slab construction - Experimental investigation and design, CONSTRUCTION AND BUILDING MATERIALS, 26(1): 145-155.
- 2012, Barauskas, I, Kaminskas, R, Influence of carbonated additives on Portland cement hydration in chloride environment, ADVANCES IN CEMENT RESEARCH, 24 (6): 365-372.
- 2012, Diab, AM, Awad, AEM, Elyamany, HE , Abd Elmoaty, AEM, Guidelines in compressive strength assessment of concrete modified with silica fume due to magnesium sulfate attack, CONSTRUCTION AND BUILDING MATERIALS, 36: 311-318.
- 2012, Zuo, XB , Sun, W, Li, H, Zhao, YK, Modeling of diffusion-reaction behavior of sulfate ion in concrete under sulfate environments, COMPUTERS AND CONCRETE, 10(1): 79-93.
- 2012, Zhang, FC , Fang, YH, Shen, DJ , Zhou, JK, Risk Assessment and Diagnostic Method of Sulfate Attack of Cement-based Material, ADVANCED BUILDING MATERIALS AND SUSTAINABLE ARCHITECTURE, PTS 1-4 Book Series: Applied Mechanics and Materials, 174-177: pp. 121-126.
- 2012, Turki, M , Zarrad, I, Bretagne, E, Queneudec, M, Influence of Filler Addition on Mechanical Behavior of Cementitious Mortar-Rubber Aggregates: Experimental Study and Modeling, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 24(11): 1350-1358.
- 2012, Tosun-Felekoglu, K , The effect of C(3)A content on sulfate durability of Portland limestone cement mortars, CONSTRUCTION AND BUILDING MATERIALS , 36: 437-447
- 2012, Liu, ZQ, Deng, DH, De Schutter, G, Yu, ZW, Chemical sulfate attack performance of partially exposed cement and cement plus fly ash paste, CONSTRUCTION AND BUILDING MATERIALS, 28(1): 230-237
- 2012, Binici, H, Kapur, S, Arocena, J, Kaplan, H, The sulphate resistance of cements containing red brick dust and ground basaltic pumice with sub-microscopic evidence of intra-pore gypsum and ettringite as strengtheners, CEMENT & CONCRETE COMPOSITES, 34(2): 279-287
- 2012, Harichane, K, Ghrici, M, Kenai, S, Effect of the combination of lime and natural pozzolana on the compaction and strength of soft clayey soils: a preliminary study, ENVIRONMENTAL EARTH SCIENCES,66(8): 2197-2205.
- 2012, Tangchirapat, W, Khamklai, S, Jaturapitakkul, C, Use of ground palm oil fuel ash to improve strength, sulfate resistance, and water permeability of concrete containing high amount of recycled concrete aggregates, MATERIALS & DESIGN, 41: 150-157.
- 2012, Zhou, CS, Li, KF, Pang, XY, Geometry of crack network and its impact on transport properties of concrete, CEMENT AND CONCRETE RESEARCH, 42(9): 1261-1272.
- 2012, Cihangir, F, Ercikdi, B, Kesimal, A, Turan, A, Deveci, H, Utilisation of alkali-activated blast furnace slag in paste backfill of high-sulphide mill tailings: Effect of binder type and dosage, MINERALS ENGINEERING, 30: 33-43.
- 2012, Vlahovic, MM, Jovanic, PB, Martinovic, SP, Boljanac, TD, Volkov-Husovic, TD, Quantitative evaluation of sulfur-polymer matrix composite quality, COMPOSITES PART B-ENGINEERING, 44(1): 458-466.
- 2012, Huang, J, Ma, BG, Li, XG, Jian, SW, Tan, HB, Microstructure and mechanical properties of poly (vinyl chloride) modified by silica fume/acrylic core-shell impact modifier blends, JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 27(5): 886-891.
- 2012, Uysal, M, The influence of coarse aggregate type on mechanical properties of fly ash additive self-compacting concrete, CONSTRUCTION AND BUILDING MATERIALS, 37: 533-540.
- 2012, Siddique, R, Kapoor, K, Kadri, EH, Bennacer, R, Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete, CONSTRUCTION AND BUILDING MATERIALS, 29: 270-278.
- 2012, Gencel, O, Koksal, F, Ozel, C, Brostow, W, Combined effects of fly ash and waste ferrochromium on properties of concrete, CONSTRUCTION AND BUILDING MATERIALS, 29: 633-640.
- 2012, Koksal, F, Gencel, O, Unal, B, Durgun, MY, Durability properties of concrete reinforced with steel-polypropylene hybrid fibers, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 19(1): 19-27.
- 2012, Gencel, O, Ozel, C, Filiz, M, Koksal, F, The relations between mechanical strengths and abrasive wear of concrete incorporating the hematite aggregate, INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 13(3): 235-243.
- 2012, Centonze, G, Leone, M, Aiello, MA, Steel fibers from waste tires as reinforcement in concrete: A mechanical characterization, CONSTRUCTION AND BUILDING MATERIALS, 36: 46-57.
- 2012, Gencoglu, M, Uygunoglu, T, Demir, F, Guler, K, Prediction of elastic modulus of steel-fiber reinforced concrete (SFRC) using fuzzy logic, COMPUTERS AND CONCRETE, 9(5): 389-402.
- 2012, Koksal, F, Gencel, O, Unal, B, Durgun, MY, Durability properties of concrete reinforced with steel-polypropylene hybrid fibers, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 19(1): 19-27.
- 2012, Kang, ST, Kim, JK, Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution, CONSTRUCTION AND BUILDING MATERIALS, 28(1): 57-65.
- 2012, Nili, M, Afroughsabet, V, Property assessment of steel-fibre reinforced concrete made with silica füme, CONSTRUCTION AND BUILDING MATERIALS, 28(1): 664-669.
- 2012, Glodkowska, W, Kobaka, J, THE MODEL OF BRITTLE MATRIX COMPOSITES FOR DISTRIBUTION OF STEEL FIBRES, JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 18(1): 145-150.
- 2012, Kang, ST, Kim, JK, The relation between fiber orientation and tensile behavior in an Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC), CEMENT AND CONCRETE RESEARCH, 41(10): 1001-1014.
- 2012, Seco, A, Ramirez, F, Miqueleiz, L, Urmeneta P, García B, Prieto, E, Oroz, V, Types of Waste for the Production of Pozzolanic Materials – A Review, INDUSTRIAL WASTE (BOOK), 141-150.
- 2012, Solanki1, P, Zaman, M, Microstructural and Mineralogical Characterization of Clay Stabilized Using Calcium-Based Stabilizers, Scanning Electron Microscopy (BOOK) Edited by Dr. Viacheslav Kazmiruk, 771-798.
- 2011, Kaminskas, R , Barauskas, I, INFLUENCE OF POZZOLANA ON C(4)AF HYDRATION AND THE EFFECTS OF CHLORIDE AND SULFATE IONS ON THE HYDRATES FORMED, CERAMICS-SILIKATY, 55(3): 261-267.
- 2011, Seco, A, Ramirez, F , Miqueleiz, L, Garcia, B , Prieto, E, The use of non-conventional additives in Marls stabilization, APPLIED CLAY SCIENCE, 51(4): 419-423.
- 2011, Ekici, BB , Aksoy, UT , Prediction of building energy needs in early stage of design by using ANFIS, EXPERT SYSTEMS WITH APPLICATIONS, 38(5): 5352-5358.
- 2011, Parmaksiz, A, Arikan, P, Vural, M, Yeltepe, E, Tukenmez, I, Ra-226, Th-232 AND K-40 RADIONUCLIDES ENHANCEMENT RATE AND DOSE ASSESSMENT FOR RESIDUES OF LIGNITE-FIRED THERMAL POWER PLANTS IN TURKEY, RADIATION PROTECTION DOSIMETRY, 147(4): 548-554.
- 2011, Hossain, KMA, Stabilized Soils Incorporating Combinations of Rice Husk Ash and Cement Kiln Dust, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 23(9): 1320-1327.
- 2011, Hossain, KMA, Mol, L, Some engineering properties of stabilized clayey soils incorporating natural pozzolans and industrial wastes, CONSTRUCTION AND BUILDING MATERIALS, 25(8): 3495-3501.
- 2011, Estabragh, AR, Beytolahpour, I, Javadi, AA, Effect of Resin on the Strength of Soil-Cement Mixture, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 23(7): 969-976.
- 2011, Turhan, S, Arikan, IH, Kose, A, Varinlioglu, A , Assessment of the radiological impacts of utilizing coal combustion fly ash as main constituent in the production of cement, ENVIRONMENTAL MONITORING AND ASSESSMENT, 177(1-4): 555-561.
- 2011, Kalkan, E , Impact of wetting-drying cycles on swelling behavior of clayey soils modified by silica füme, APPLIED CLAY SCIENCE, 52(4): 345-352.
- 2011, Harichane, K, Ghrici, M, Missoum, H, Influence of natural pozzolana and lime additives on the temporal variation of soil compaction and shear strength, FRONTIERS OF EARTH SCIENCE, 5(2): 162-169.
- 2011, Harichane, K, Ghrici, M, Kenai, S, Effect of curing time on shear strength of cohesive soils stabilized with combination of lime and natural pozzolana, INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 9(2): 90-96.
- 2011, Wang, DX, Wang, HX, Chen, WZ, Reinforcement Mechanism of Cement/lime-fly ash Treated Sediments as Road Construction Materials, ARCHITECTURE AND BUILDING MATERIALS, PTS 1 AND 2 Book Series: Applied Mechanics and Materials, Book Editor(s): Zhou, XJ, 99-100: 924-927.
- 2011, Wang, LF, Orthogonal Tests and Multi-element Linear Regression Analysis of Compressive Strength of Nanometer Silicon Cemented Soil, EQUIPMENT MANUFACTURING TECHNOLOGY AND AUTOMATION, PTS 1-3 Book Series: Advanced Materials Research, Editor(s): Chen, X, 317-319: 34-41.
- 2011, Liu, C, Shi, B, Zhou, J, Tang, CS, Quantification and characterization of microporosity by image processing, geometric measurement and statistical methods: Application on SEM images of clay materials, APPLIED CLAY SCIENCE, 54(1): 97-106.
- 2011, Sezer, A, Altun, S, Goktepe, BA, RELATIONSHIPS BETWEEN SHAPE CHARACTERISTICS AND SHEAR STRENGTH OF SANDS, SOILS AND FOUNDATIONS, 51(5): 857-871.
- 2011, Gencel, O, Kocabas, F, Gok, MS, Koksal, F, Comparison of artificial neural networks and general linear model approaches for the analysis of abrasive wear of concrete, CONSTRUCTION AND BUILDING MATERIALS, 25(8): 3486-3494.
- 2011, Gencel, O, Gok, MS, Brostow, W, Effect of metallic aggregate and cement content on abrasion resistance behaviour of concrete, MATERIALS RESEARCH INNOVATIONS, 15(2): 116-123.
- 2011, Yetgin, S, Cavdar, A, Abrasion Resistance of Cement Mortar with Different Pozzolanic Compositions and Matrices, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 23(2): 138-145.
- 2011, Gencel, O, Ozel, C, Filiz, M, Investigation on abrasive wear of concrete containing hematite, INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 18(1): 40-48.
- 2011, Turk, K, Karatas, M, Abrasion resistance and mechanical properties of self-compacting concrete with different dosages of fly ash/silica füme, INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 18(1): 49-60.
- 2011, Acebes, M, Molero, M, Segura, I, Moragues, A, Hernandez, MG, Study of the influence of microstructural parameters on the ultrasonic velocity in steel-fiber-reinforced cementitious materials, CONSTRUCTION AND BUILDING MATERIALS, 25(7): 3066-3072.
- 2011, Soulioti, DV, Barkoula, NM, Paipetis, A, Matikas, TE, Effects of Fibre Geometry and Volume Fraction on the Flexural Behaviour of Steel-Fibre Reinforced Concrete, STRAIN, 47(1): E535-E541.
- 2011, Kang, ST, Lee, BY, Kim, JK, Kim, YY, The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete, CONSTRUCTION AND BUILDING MATERIALS, 25(5): 2450-2457.
- 2011, Siddique, R, Khan, MI, Fly Ash, SUPPLEMENTARY CEMENTING MATERIALS Book Series: Engineering Materials, Book Author(s):Siddique, R, Khan, MI, 1-66.
- 2010, Kaminskas, R , Barauskas, I, THE INFLUENCE OF POZZOLANA TO THE TRICALCIUM ALUMINATE HYDRATION AND THE EFFECTS OF CHLORIDE IONS TO FORMED HYDRATES, CERAMICS-SILIKATY, 54(1): 47-52.
- 2010, Mashrei, MA, Abdulrazzaq, N , Abdalla, TY, Rahman, MS, Neural networks model and adaptive neuro-fuzzy inference system for predicting the moment capacity of ferrocement members, ENGINEERING STRUCTURES, 32(6): 1723-1734.
- 2010, Huang, JC , Using Fuzzy Neural Network to Explore the Effect of Internet on Quality of Life, COMPUTATIONAL COLLECTIVE INTELLIGENCE: TECHNOLOGIES AND APPLICATIONS, PT II Book Series: Lecture Notes in Artificial Intelligence, 6422: 402-410.
- 2010, Brai, M, Casaletto, MP, Gennaro, G, Marrale, M, Schillaci, T , Tranchina, L, Degradation of stone materials in the archaeological context of the Greek-Roman Theatre in Taormina (Sicily, Italy), APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 100(3): 945-951
- 2010, Bonakdar, A, Mobasher, B, Multi-parameter study of external sulfate attack in blended cement materials, CONSTRUCTION AND BUILDING MATERIALS , 24(1): 61-70
- 2010, Al-Mukhtar, M, Lasledj, A, Alcover, JF, Behaviour and mineralogy changes in lime-treated expansive soil at 20 degrees C, APPLIED CLAY SCIENCE, 50(2): 191-198.
- 2010, Turhan, S, Arikan, IH, Yucel, B, Varinlioglu, A, Kose, A, Evaluation of the radiological safety aspects of utilization of Turkish coal combustion fly ash in concrete production, FUEL, 89(9): 2528-2535.
- 2010, Guneyli, H, Influence of Afsin-Elbistan highly limy fly ash on engineering behavior of a cohesive soil, SCIENTIFIC RESEARCH AND ESSAYS, 5(11): 1307-1316.
- 2010, Kashiwakura, S, Takahashi, T, Maekawi, H, Nagasaka, T, Application of B-11 MAS-NMR to the characterization of boron in coal fly ash generated from Nantun coal, FUEL, 89(5): 1006-1011.
- 2010, Suneel, M, Kwon, J, Im, JC, Jeon, CW, Long-Term Consolidation and Strength Behavior of Marine Clay Improved with Fly Ash, MARINE GEORESOURCES & GEOTECHNOLOGY, 28(2): 105-114.
- 2010, Orejarena, L, Fall, M, The use of artificial neural networks to predict the effect of sulphate attack on the strength of cemented paste backfill, BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 69(4): 659-670.
- 2010, Abdelkader, SM, Pozo, ER, Terrades, AM, Evolution of microstructure and mechanical behavior of concretes utilized in marine environments, MATERIALS & DESIGN, 31(7): 3412-3418.
- 2010, Chalee, W, Ausapanit, P, Jaturapitakkul, C, Utilization of fly ash concrete in marine environment for long term design life analysis, MATERIALS & DESIGN, 31(3): 1242-1249.
- 2010, Siddique, R, Khatib, JM, Abrasion resistance and mechanical properties of high-volume fly ash concrete, MATERIALS AND STRUCTURES, 43(5): 709-718.
- 2010, Sivaraja, M, Kandasamy, Velmani, N, Pillai, MS, Study on durability of natural fibre concrete composites using mechanical strength and microstructural properties, BULLETIN OF MATERIALS SCIENCE, 33(6): 719-729.
- 2010, Nili, M, Afroughsabet, V, Combined effect of silica fume and steel fibers on the impact resistance and mechanical properties of concrete, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 37(8): 879-886.
- 2010, de Carvalho, MRP, Fairbairn, EDR, Toledo, RD, Cordeiro, GC, Hasparyk, NP, Influence of steel fibers on the development of alkali-aggregate reaction, CEMENT AND CONCRETE RESEARCH, 40(4): 598-604.
- 2010, Sivaraja, M, Kandasamy, S, Thirumurugan, A, Mechanical strength of fibrous concrete with waste rural materials, JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 69(4): 308-312.
- 2009, Chan, APC, Chan, DWM, Yeung, JFY, Overview of the Application of "Fuzzy Techniques" in Construction Management Research, JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT-ASCE, 135(11): 1241-1252
- 2009, Saridemir, M , Predicting the compressive strength of mortars containing metakaolin by artificial neural networks and fuzzy logic, ADVANCES IN ENGINEERING SOFTWARE, 40(9): 920-927
- 2009, Topcu, IB, Boga, AR , Hocaoglu, FO, Modeling corrosion currents of reinforced concrete using ANN, AUTOMATION IN CONSTRUCTION, 18(2): 145-152
- 2009, Tangchirapat, W, Jaturapitakkul, C, Kiattikomol, K, Compressive Strength and Expansion of Blended Cement Mortar Containing Palm Oil Fuel Ash, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 21(8): 426-431
- 2009, Lukschova, S, Prikryl, R, Pertold, Z, Petrographic identification of alkali-silica reactive aggregates in concrete from 20th century bridges, CONSTRUCTION AND BUILDING MATERIALS, 23(2): 734-741
- 2009, Gurten, AA, Bayol, E, Kayakirilmaz, K, Erbil, M, Influence of polyvinylpyrrolidone on rebar corrosion in sulphate solution, STEEL AND COMPOSITE STRUCTURES, 9(1): 77-87.
- 2009, Kalkan, E, Effects of silica fume on the geotechnical properties of fine-grained soils exposed to freeze and thaw, COLD REGIONS SCIENCE AND TECHNOLOGY, 58(3): 130-135.
- 2009, Kalkan, E, Influence of silica fume on the desiccation cracks of compacted clayey soils, APPLIED CLAY SCIENCE, 43(3-4): 296-302.
- 2009, Silitonga, E, Levacher, D, Mezazigh, S, Effects of the use of fly ash as a binder on the mechanical behaviour of treated dredged sediments, ENVIRONMENTAL TECHNOLOGY, 30(8): 799-807.
- 2009, Maatta, J, Hellstedt, M, Kuisma, R, Kymalainen, HR, Mahlberg, R, Sjoberg, AM, Effects of chemical and mechanical wearing on the cleanability and surface properties of traditional and new surface materials in cattle barns - a laboratory study, BIOSYSTEMS ENGINEERING, 103(4): 464-473.
- 2009, Kymalainen, HR, Kuisma, R, Maatta, J, Sjoberg, AM, Assessment of cleanness of environmental surfaces in cattle barns and piggeries, AGRICULTURAL AND FOOD SCIENCE, 18(3-4): 268-282.
- 2009, Aiello, MA, Leuzzi, F, Centonze, G, Maffezzoli, A, Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength, WASTE MANAGEMENT, 29(6): 1960-1970.
- 2009, Atis, CD, Karahan, O, Properties of steel fiber reinforced fly ash concrete, CONSTRUCTION AND BUILDING MATERIALS, 23(1): 392-399.
- 2009, Xu, BW, Shi, HS, Correlations among mechanical properties of steel fiber reinforced-concrete, CONSTRUCTION AND BUILDING MATERIALS, 23(12): 3468-3474.
- 2008, Bassuoni, MT , Nehdi, ML, Neuro-fuzzy based prediction of the durability of self-consolidating concrete to various sodium sulfate exposure regimes, COMPUTERS AND CONCRETE, 5(6): 573-597.
- 2008, Bassuoni, MT, Nehdi, ML, Neuro-fuzzy based prediction of the durability of self-consolidating concrete to various sodium sulfate exposure regimes, COMPUTERS AND CONCRETE, 5(6): 573-597
- 2008, Topcu, IB, Saridemir, M, Prediction of rubberized concrete properties using artificial neural network and fuzzy logic, CONSTRUCTION AND BUILDING MATERIALS, 22(4): 532-540.
- 2008, Topcu, IB, Saridemir, M, Prediction of rubberized mortar properties using artificial neural network and fuzzy logic, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 199(1-3): 108-118
- 2008, Topcu, IB, Saridemir, M , Prediction of mechanical properties of recycled aggregate concretes containing silica fume using artificial neural networks and fuzzy logic, COMPUTATIONAL MATERIALS SCIENCE, 42(1): 74-82
- 2008, Topcu, IB, Saridemir, M, Prediction of compressive strength of concrete containing fly ash using artificial neural networks and fuzzy logic, COMPUTATIONAL MATERIALS SCIENCE, 41(3): 305-311
- 2008, 31. Shehata, MH, Adhikari, G, Radornski, S, Long-Term Durability of Blended Cement Against Sulfate Attack, ACI MATERIALS JOURNAL, 105(6): 594-602
- 2008, Guerrero, A, Goni, S, Lorenzo, MP, Long term durability at 40 degrees C of ecoefficient belite cement-mortar exposed to sulfate attack, ADVANCES IN CEMENT RESEARCH, 20(4): 139-144
- 2008, Zhang, WH, Xi, WY, Wang, BT, Hong, BN, Test study of high liquid limit clay modified by quick lime used as sub-grade material, JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 15: 126-130.
- 2008, Kalkan, E, Bayraktutan, MS, Geotechnical evaluation of Turkish clay deposits: a case study in Northern Turkey, ENVIRONMENTAL GEOLOGY, 55(5): 937-950.
- 2008, Goktepe, AB, Sezer, A, Sezer, GI, Ramyar, K, Classification of time-dependent unconfined strength of fly ash treated clay, CONSTRUCTION AND BUILDING MATERIALS, 22(4): 675-683.
- 2008, Karahan, O, Tanyildizi, H, Atis, CD, An artificial neural network approach for prediction of long-term strength properties of steel fiber reinforced concrete containing fly ash, JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 9(11): 1514-1523.
- 2008, Uygunoglu, T, Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete, MATERIALS AND STRUCTURES, 41(8): 1441-1449.
- 2007, Topcu, IB, Bilir, T, Effects of slag fineness on durability of mortars, JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 8(11): 1725-1730
- 2007, Hossain, KMA (Hossain, K. M. A.); Lachemi, M (Lachemi, M.); Easa, S, Stabilized soils for construction applications incorporating natural resources of Papua new Guinea, RESOURCES CONSERVATION AND RECYCLING, 51(4): 711-731.
- 2007, Gross, M, Soulard, M, Caullet, P, Patarin, J, Saude, I, Synthesis of faujasite from coal fly ashes under smooth temperature and pressure conditions: A cost saving process, MICROPOROUS AND MESOPOROUS MATERIALS, 104(1-3):67-76.
- 2007, Guney, Y, Sari, D, Cetin, M, Tuncan, M, Impact of cyclic wetting-drying on swelling behavior of lime-stabilized soil, BUILDING AND ENVIRONMENT, 42(2): 681-688.
Finished Research Projects (10 entries)- 2015, E.Ü. Bilimsel Araştırma Projesi (11-MUH-33), G. İnan Sezer, C. Yüksel, Uçucu kül, silis dumanı ve metakaolin içeren harçların sülfat direnci,Yürütücü.
- TÜBİTAK Kariyer Projesi (107M607), S. Altun, G.İ. Sezer, M. Kuruoğlu, Çelik Endüstrisi Atıklarının İnşaat Sektöründe Değerlendirilmesi, 2012 -Araştırmacı
- TÜBİTAK Araştırma Projesi (107M345), Ş. Yazıcı, G.İ. Sezer, Farklı dayanım seviyelerindeki betonlarda beton örtü tabakası kalınlığının, yüksek sıcaklık seviyesinin ve etki süresinin donatı aderansına etkisi, 2010-Araştırmacı
- E.Ü. Bilimsel Araştırma Projesi (2006/Müh/021), K. Ramyar, G.İ. Sezer, Kalker ve klinker özelliklerinin kalkerli çimentonun sülfat direncine etkisi, 2008- Araştırmacı
- EBİLTEM Araştırma Projesi (2006/BIL/001), S. Altun, A.B. Göktepe, K.Ramyar, A. Sezer, G.İ. Sezer, Yol Üstyapısında, Zemin Tabakalarında ve Betonda Kullanım Açısından Granüler Malzeme Mezoyapısının Görüntü İşleme Algoritmaları Kullanılarak Modellenmesi, 2007- Araştırmacı
- EBİLTEM Araştırma Projesi (2006/BIL/002), K.Ramyar, G.İ. Sezer, Kalker ve klinker özelliklerinin kalkerli çimento özelliklerine etkisi, 2007- Araştırmacı
- TÜBİTAK Araştırma Projesi (104I076), K.Ramyar, G.İ. Sezer, Kalker ve klinker özelliklerinin kalkerli çimento özelliklerine etkisi, 2007-Araştırmacı
- TÜBİTAK Hızlı Destek Projesi (106M523), Ş. Yazıcı, G.İ. Sezer, Çelik lifli betonların darbe direncine agrega max. boyutunun ve kökeninin etkisi, 2007- Araştırmacı
- E.Ü. Bilimsel Araştırma Projesi (2003/Müh/032), G.İ. Sezer, K.Ramyar, Kalker ve klinker özelliklerinin kalkerli çimento özelliklerine etkisi, 2006-Yürütücü
- E.Ü. Bilimsel Araştırma Projesi (2001/Müh/026), Ş.Yazıcı, G.İnan, Değişik Tip Çimentoların ve Bunlardan Üretilen Betonların Sülfat Direnci, 2003- Araştırmacı
Student's Completed Thesis (1 entries)- Yüksek Lisans, 2011, Çelik endüstrisi atıklarının beton özelliklerine etkisi, Mert GÜLDEREN