Akademik Bilgiler



GÖZDE İNAN SEZER
DOÇENT
Mühendislik Fakültesi
İnşaat Mühendisliği Bölümü
Yapı Ana Bilim Dalı
İletişim Bilgileri- E-posta: gozde.sezer@ege.edu.tr
- Telefon: 0(232)3886026-5177
Eğitim Bilgileri- Lisans: Ege Üniversitesi, İnşaat Mühendisliği, Türkiye, 1998
- Yüksek Lisans: Ege Üniversitesi, İnşaat Mühendisliği, Türkiye, 2002
- Doktora: Ege Üniversitesi, İnşaat Mühendisliği, Türkiye, 2007
- Yardımcı Doçentlik: Ege Üniversitesi, Mühendislik Fakültesi, Türkiye, 2007
- Doçentlik: Ege Üniversitesi, Türkiye , 2012

İdari ve Akademik Görevleri (4 adet)- Danışmanlık işleri ve araştırma projeleri komisyonu üyesi, 2012-
- Öğretim Üyesi, 2007-
- Bölüm öğrenci işleri otomasyon sorumlusu, 2004-2008
- Araştırma Görevlisi, 1999-2007
Uzmanlık Alanları- Malzeme Bilimi (6040200)
- Yapı Malzemesi (6240301)
İndekslerce Taranan Dergilerdeki Yayınları (27 adet)- 2016, Ş. Yazici, G. İnan Sezer, Alper Sezer, Prediction of impact resistance properties of concrete using radial basis function networks, Indian Journal of Materials and Engineering Sciences, Accepted.
- 2016, İ. Kalıpcılar, A. Mardani-Aghabaglou, G. İnan Sezer, S. Altun, A. Sezer, Assessment of the effect of sulfate attack on cement stabilized montmorillonite, Geomechanics and Engineering, Accepted.
- 2015, G.İ. Sezer, M. Gülderen “Usage of steel slag in concrete as fine and/or coarse”, Indian Journal of Materials and Engineering Sciences, 22 (3): 339-344.
- 2015, G.İ. Sezer, Ş. Yazıcı, A. Sezer, “Evaluation of hgh temperature effects on concrete-reinforcement bar bond using automated digital image processing”, Indian Journal of Materials and Engineering Sciences, 22: 581-586.
- 2015, G.İ. Sezer, Ş. Yazıcı, A. Sezer, “Dependence of impact resistance of steel fiber reinforced concrete on aggregate”, Acta Physica Polonica A, 128: 37-39.
- 2015, A. Mardani-Aghabaglou, İ. Kalıpcılar, G. İ. Sezer, A. Sezer, S. Altun, Freeze-thaw resistance and chloride-ion penetration of cement-stabilized clay exposed to sulfate attack, Applied Clay Sciences, 115: 179-188.
- 2015, G.İ. Sezer, Ş.Yazıcı, Polimer katkılı harçlarda farklı kür koşullarının dayanıma etkisi, Celal Bayar Üniveristesi Fen Bilimleri Dergisi, 11(2): 195-201.
- 2014, A. Mardani-Aghabaglou, G.İnan Sezer, K. Ramyar, Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point, Construction and Building Materials, 70: 17–25.
- 2012, G. İ. Sezer, Compressive strength and sulfate resistance of limestone and/or silica fume mortars, Construction and Building Materials, 26 (1): 613-618.
- 2012, Ş. Yazıcı, G. İ. Sezer, H. Şengül, The effect of high temperature on the compressive strength of mortars, Construction and Building Materials, 35: 97-100.
- 2010, G. İ. Sezer, O. Çopuroğlu, K. Ramyar, Microstructure of 2 and 28-day cured Portland limestone cement pastes, Indian Journal of Engineering & Materials Sciences, 17 (4): 289-294.
- 2008, Ş. Yazıcı, G. İ. Sezer, Effect of elevated temperatures and time on compressive and tensile properties of concretes, Indian Journal of Engineering & Materials Sciences, 15 (1): 23-28.
- 2008, A.B. Göktepe, A. Sezer, G. İ. Sezer, K. Ramyar, Classification of time-dependant unconfined strength of fly ash treated clay, Construction and Building Materials, 22 (4): 675-683.
- 2008, G. İ. Sezer, K. Ramyar, B. Karasu, A. B. Göktepe, A. Sezer, Image analysis of sulfate attack on hardened cement paste, Materials & Design, 29 (1): 224-231.
- 2008, Ş.Yazıcı, G.İ. Sezer, Çelik lifli betonların darbe direncine agrega maksimum boyutunun etkisi, Pamukkale Üniversitesi Mühendislik Fakültesi Mühendislik Bilimleri Dergisi, Cilt 14, Sayı.3, 237-245.
- 2007, G. İnan, A.B. Göktepe, K. Ramyar, A. Sezer, Prediction of sulfate expansion of PC mortar using adaptive Neuro-Fuzzy methodology, Building and Environment, 42 (3): 1264-1269.
- 2007, K. Ramyar, G. İnan, Sodium sulfate attack on plain and blended cements, Building and Environment, 42 (3): 1368-1372 pp.
- 2007, Ş. Yazıcı, G. İnan, V. Tabak, Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC, Construction and Building Materials, 21 (6): 1250-1253.
- 2007, Ş. Yazıcı, G. İ. Sezer, The effect of cylindrical specimen size on the compressive strength of concrete, Building and Environment, 42 (6): 2417-2420.
- 2007, Ş.Yazıcı, G.İ. Sezer, Abrasion resistance estimation of high strength concrete, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Cilt 13, Sayı.1, 1-6.
- 2007, A.B.Göktepe, A.Sezer, G.İ.Sezer, K.Ramyar, Determination of sulfate resistance level of cements using unsupervised clustering algorithms, Cement and Concrete World, V.12, Sayı. 67, 44-55.
- 2006, A. Sezer, G. İnan, H.R. Yılmaz, K. Ramyar, Utilization of a very high lime fly ash for improvement of Izmir clay, Building and Environment, 41(2): 150–155 pp.
- 2006, Ş. Yazıcı, G. İnan, An investigation on the wear resistance of high strength concretes, Wear, 260 (6): 615-618.
- 2006, A.B. Göktepe, G. İnan, K. Ramyar, A. Sezer, Estimation of sulfate expansion level of PC mortar using statistical and neural approaches, Construction and Building Materials, 20 (7): 441-449.
- 2006, Ş. Yazıcı, G.İ. Sezer, K. Ramyar, Effect of capping material on the uniformity of concrete strength test results, Cement and Concrete World, V. 11, Sayı. 62, 64-70.
- 2005, G. İnan, A. Sezer, K. Ramyar, H.R. Yılmaz, Değişik uçucu küllerin yüksek plastisiteli kilin serbest basınç dayanımına etkisi, Selçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi Cilt 20, Sayı.1, 19–25.
- 2005, Ş.Yazıcı, G. İnan, İnce agreganın bir kısmı yerine volkanik cüruf kullanımının beton özelliklerine etkisi, Anadolu Üniversitesi Bilim ve Teknoloji Dergisi Cilt 6, Sayı.2, 197–202.

İndekslerce Taranmayan Dergilerdeki Yayınları (1 adet)- 2012, G. İ. Sezer , A. B. Göktepe, A. Sezer, K. Ramyar, F. T. Dilek, M. Tuyan, Cement type and the sulfate resistance of PC mortar, Awer Procedia Information Technology & Computer Science, 1: 572-577.

Uluslararası Toplantılarda Sunulan Bildirileri (13 adet)- 2015, Ş. Yazıcı, G.İ. Sezer, A. Sezer, Prediction of concrete class using impact resistance and mechanical properties, International Porous and Powder Materials Symposium & Exhibition, Turkey, 18 Eylül, Çeşme, İzmir. CDROM.
- 2015, Ş. Yazıcı, G.İ. Sezer, The relationship between compressive strength and ultrasonic pulse velocity according to surface texture and testing curing time, International Porous and Powder Materials Symposium & Exhibition, Turkey, 18 Eylül, Çeşme, İzmir. CDROM.
- 2015, Ş. Yazıcı, G.İ. Sezer, A. Sezer, Modeling properties of SFRC by unsupervised clustering algorithms, 2nd International Conference on Computational and Experimental Science and engineering, Antalya, Turkey, October 14-19, CDROM.
- 2015, A. Mardani-Aghabaglou, İ. Kalıpcılar, S. Altun, G. İ. Sezer, A. Sezer, “Comparison of unidimensional expansion levels of kaolinite stabilized with different types of cements”, International Symposium on Shrink-Swell Processes in Soils, Climate and Construction, Marne La Valée, Fransa, 18-19 Haziran, s. 151-160.
- 2015, İ. Kalıpcılar, A. Mardani-Aghabaglou, A. Sezer, G. İ. Sezer, S. Altun, “Unconfined compressive strength, chloride-ion penetration and freezing-thawing resistance of cement stabilized clay”, International Conference on Civil and Environmental Engineering, Kapadokya, Türkiye, 20-23 Mayıs, s.1658-1665.
- 2015, G. İ. Sezer, Ş. Yazıcı, “Effect of aggregate maximum size on properties of fiber reinforced concrete”, International Conference on Civil and Environmental Engineering, Kapadokya, Türkiye, 20-23 Mayıs, Poster.
- 2014, G. İ. Sezer, Ş. Yazıcı, A. Sezer, “Effect of aggregate type on mechanic and dynamic properties of fiber reinforced concretes”, International conference on computational and experimental science and engineering, Antalya, Turkey, October 25-29, CDROM.
- 2011, G. İ. Sezer, A. B. Göktepe, A. Sezer, K. Ramyar, F. T. Dilek, M. Tuyan, “Investigation of the effect cement type on the sulfate resistance of pc mortar by use of clustering algorithms”, 2nd World Conference on Information and Technology, Antalya, Türkiye, 23-27 Kasım, CD-ROM.
- 2008, G.İ. Sezer, B. Çeneli, K. Ramyar, Properties of composite cements containing fly ash and limestone, 8th International Congress on Advances in Civil Engineering, Famogusta, North Cyprus, 189-196 pp., 15-17 September.
- 2006, Ş. Yazıcı, G.İ. Sezer, Effect of Aggregate Maximum Size and Steel Fiber Content on the Mechanical Properties of Concrete, 4th FAE International Symposium, Gemikonağı, TRNC, 163-166 pp., 30 November-1 December 2006.
- 2006, G.İ. Sezer, A.Sezer, Ş. Yazıcı, Evaluation of the Flakiness and Elongation of Aggregates Using Digital Image Processing, 4th FAE International Symposium, Gemikonağı, TRNC, 153-156 pp., 30 November-1 December 2006.
- 2006, A.B. Göktepe, A. Sezer, G.İ. Sezer, On The Use of Unsupervised Clustering Algorithms in Civil Engineering Practice, Seventh International Congress on Advances in Civil Engineering, Istanbul, Turkey, 1-10 pp., 11-13 October
- 2003, K.B.Bozdoğan, E.Kaya, A.Sezer, G.İnan, P.Aklık, The Effect of Foundation Flexibility of A Shear Wall System in Dynamic Analysis, Int. Conference on New Developments in Soil Mechanics and Geotechnical Engineering, pp.111–118, Lefkoşa, TRNC.

Ulusal Toplantılarda Sunulan Bildirileri (7 adet)- 2015, İ. Kalıpcılar A. Mardani-Aghabaglou, G. İ. Sezer, A. Sezer, S. Altun, Çimento stabilize kilin sülfat etkisi altında dayanım ve geçirimlilik özellikleri, 6. Geoteknik Sempozyumu, 26-27 Kasım, Adana, CDROM.
- 2005, Ş.Yazıcı, G.İnan, Yüksek mukavemetli betonlarda sülfat ve tuz etkisi, Uluslararası Katılımlı Kıyı Mühendisliği V. Ulusal Sempozyumu, 2. Cilt, s. 283–292, 5–7 Mayıs 2005, Bodrum, Türkiye.
- 2005, A. Sezer, G. İnan, R. Daneshfaraz, Trapez kesitli açık kanallardaki kararsız akımların sayısal çözümlerinin karşılaştırılması, II. Ulusal Su Mühendisliği Sempozyumu, 21–24 Eylül, Gümüldür, s.661-671.
- 2005, A. Sezer, G. İnan, R. Daneshfaraz, Dikdörtgen kesitli açık kanallarda oluşan kararsız akımların değişik metotlarla çözümü, II. Ulusal Su Mühendisliği Sempozyumu, 21–24 Eylül, Gümüldür, s. 399-409.
- 2004, G.İnan, O.E.Köseoğlu, K.Ramyar, Süper Akışkanlaştırıcı Katkının Betonun Su İhtiyacına ve Basınç Dayanımına Etkisi, Beton 2004 Kongresi, s. 674–681, 10–12 Haziran 2004, İstanbul, Türkiye.
- 2003, G.İnan, A.Sezer, Zemin İyileştirme Yöntemleri ve Kullanılan Malzemeler Üzerine Bir İnceleme, Mühendislik Bilimleri Genç Araştırmacılar I. Kongresi, s.369–376, 17–20 Şubat 2003, İstanbul, Türkiye.
- 2002, K.Ramyar, G.İnan, Çimento Sülfat Direncinin Değişik Test Metotlarıyla İncelenmesi, IV. Ulusal Kıyı Mühendisliği Sempozyumu, 1. Cilt, s.291–303, 24–27 Ekim 2002, Antalya, Türkiye.

Kaynak Gösterilme AdetleriKendisi tarafından 1 kez kaynak gösterilmiştir.
Başkaları tarafından 143 kez kaynak gösterilmiştir.
İndeksli Yayınlarını Kaynak Gösteren Yayınlar (144 adet)- 2013, Dutra, VFP, Maghous, S, Campos, A, A homogenization approach to macroscopic strength criterion of steel fiber reinforced concrete, CEMENT AND CONCRETE RESEARCH, 44: 34-45.
- 2013, Yazici, S, Arel, HS, The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs, CONSTRUCTION AND BUILDING MATERIALS, 40: 299-305.
- 2013, Michels, J, Christen, R, Waldmann, D, Experimental and numerical investigation on postcracking behavior of steel fiber reinforced concrete, ENGINEERING FRACTURE MECHANICS, 98: 326-349.
- 2013, Barauskas, I, INFLUENCE OF POZZOLANA ON THE HYDRATION OF C(4)AF RICH CEMENT IN CHLORIDE ENVIRONMENT, CERAMICS-SILIKATY, 57 (1): 45-52.
- 2013, Deneme, IO , Estimation of modal damping ratio of impact-damped flexible beams using ANFIS, NEURAL COMPUTING & APPLICATIONS, 23(6): 1669-1676.
- 2013, Olgun, M, Effects of polypropylene fiber inclusion on the strength and volume change characteristics of cement-fly ash stabilized clay soil, GEOSYNTHETICS INTERNATIONAL, 20(4): 263-275.
- 2013, Wang, DX, Abriak, NE, Zentar, R, Co-valorisation of Dunkirk dredged sediments and siliceous-aluminous fly ash using lime, ROAD MATERIALS AND PAVEMENT DESIGN, 14(2): 415-431.
- 2013, Estabragh, AR, Pereshkafti, MRS, Parsaei, B, Javadi, AA, Stabilised expansive soil behaviour during wetting and drying, INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 14(4): 418-427.
- 2013, Liu, C, Tang, C, Shi, B, Suo, WB, Automatic quantification of crack patterns by image processing, COMPUTERS & GEOSCIENCES, 57: 77-80.
- 2013, Xu, H, Zhao, YX, Cui, L, Xu, B, Sulphate attack resistance of high-performance concrete under compressive loading, JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A ,14(7): 459-468.
- 2013, Yuan, HF, Chen, HS, Quantitative solution of size and dosage of capsules for self-healing of cracks in cementitious composites, COMPUTERS AND CONCRETE, 11(3): 223-236.
- 2013, Liu, KW, Deng, M, Mo, LW, Effect of Fly Ash on Resistance to Sulfate Attack of Cement-based Materials, TESTING AND EVALUATION OF ADVANCED BUILDING MATERIALS Book Series: Key Engineering Materials, Yao, W, 539: 124-129.
- 2013, Vlahovic, MM, Jovanic, PB, Martinovic, SP, Boljanac, TD, Volkov-Husovic, TD, Quantitative evaluation of sulfur-polymer matrix composite quality, COMPOSITES PART B-ENGINEERING, 44(1): 458-466.
- 2013, Sun, HF, Hohl, B, Cao, YZ, Handwerker, C, Rushing, TS, Cummins, TK, Weiss, J, Jet mill grinding of portland cement, limestone, and fly ash: Impact on particle size, hydration rate, and strength, CEMENT & CONCRETE COMPOSITES, 44: 41-49.
- 2013, Jeong, SG, Jeon, J, Cha, J, Kim, J, Kim, S, Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete, ENERGY AND BUILDINGS, 62 : 190-195.
- 2013, Toma, IO, Covatariu, D, Toma, AM, Taranu, G, Budescu, M, Strength and elastic properties of mortars with various percentages of environmentally sustainable mineral binder, CONSTRUCTION AND BUILDING MATERIALS, 43: 348-361.
- 2013, Nadeem, A, Memon, SA, Lo, TY, Mechanical performance, durability, qualitative and quantitative analysis of microstructure of fly ash and Metakaolin mortar at elevated temperatures, CONSTRUCTION AND BUILDING MATERIALS , 38: 338-347.
- 2013, Ozguven, A, Ozcelik, Y, Investigation of some property changes of natural building stones exposed to fire and high heat, CONSTRUCTION AND BUILDING MATERIALS, 38: 813-821.
- 2013, Heikal, M, El-Didamony, H, Sokkary, TM, Ahmed, IA, Behavior of composite cement pastes containing microsilica and fly ash at elevated temperature, CONSTRUCTION AND BUILDING MATERIALS, 38: 1180-1190.
- 2013, Rashad, AM, A preliminary study on the effect of fine aggregate replacement with metakaolin on strength and abrasion resistance of concrete, CONSTRUCTION AND BUILDING MATERIALS, 44: 487-495.
- 2013, Gencel, O, Koksal, F, Brostow, W, Wear minimisation in concrete with haematite, MATERIALS RESEARCH INNOVATIONS, 17(2): 92-97.
- 2013, Bywalski, C; Kaminski, M, RHEOLOGICAL STRAINS IN CONCRETE MODIFIED WITH STEEL FIBRE REINFORCEMENT, JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 19 (5):656-664.
- 2013, Baeza, FJ, Galao, O, Zornoza, E, Garces, P, Effect of aspect ratio on strain sensing capacity of carbon fiber reinforced cement composites, MATERIALS & DESIGN, 51: 1085-1094.
- 2013, Yazici, S, Arel, HS, Tabak, V, CONSTRUCTION AND BUILDING MATERIALS, 41: 68-72.
- 2013, Soulioti, DV, Barkoula, NM, Koutsianopoulos, F, Charalambakis, N, Matikas, TE, The effect of fibre chemical treatment on the steel fibre/cementitious matrix interface, CONSTRUCTION AND BUILDING MATERIALS, 40: 77-83.
- 2013, Gesoglu, M, Guneyisi, E, Alzeebaree, R, Mermerdas, K, Effect of silica fume and steel fiber on the mechanical properties of the concretes produced with cold bonded fly ash aggregates, CONSTRUCTION AND BUILDING MATERIALS, 40: 982-990.
- 2013, Aydin, S, Baradan, B, The effect of fiber properties on high performance alkali-activated slag/silica fume mortars, COMPOSITES PART B-ENGINEERING, 45(1): 63-69.
- 2013, Su, AS, Cai, YB, Influence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of Shotcrete, ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3 Book Series: Advanced Materials Research, Editor(s): Jiang, ZY; Liu, XH; Jiao, SH; Han, JT, 652-654: 1226-1232.
- 2013, Gencel, O, Ozel, C, Koksal, F, Martinez-Barrera, G, Brostow, W, Polat, H, Fuzzy Logic Model for Prediction of Properties of Fiber Reinforced Self-compacting Concrete, MATERIALS SCIENCE-MEDZIAGOTYRA, 19(2): 203-215.
- 2013, Kampmann, R, Roddenberry, M, Ping, WV, Contribution of Specimen Surface Friction to Size Effect and Rupture Behavior of Concrete, ACI MATERIALS JOURNAL, 110(2): 169-176.
- 2013, Kaminskas, R, Barauskas, I, Influence of pozzolana on sulfate attack of cement stone affected by chloride ions, MATERIALS AND STRUCTURES, Published online:15 August 2013.
- 2013, Dilmaç, H, Demir, F, Stress–strain modeling of high-strength concrete by the adaptive network-based fuzzy inference system (ANFIS) approach, NEURAL COMPUTING AND APPLICATIONS, 23 (1): 385-390.
- 2013, Kaminskas, R, Barauskas, I, Influence of pozzolana on sulfate attack of cement stone affected by chloride ions, MATERIALS AND STRUCTURES, Published online:15 August 2013.
- 2013, Kuoa WT, Liub, CC, Wang, JY, Evaluation of the sulfate resistance of fly ash and slag concrete by using modified ACMT, CONSTRUCTION AND BUILDING MATERIALS , 49: 40-45.
- 2013, Motamedi, S, Song, KI, Hashim, R, Prediction of unconfined compressive strength of pulverized fuel ash–cement–sand mixture, Materials and Structures, published online: 21 November 2013.
- 2013, Calik, U, Sadoglu, E, Classification, shear strength, and durability of expansive clayey soil stabilized with lime and perlite, Natural Hazards, published online: 13 November 2013.
- 2013, Ibrahim SF, Evaluation of Geotechnical Properties and Liquefaction Behavior of Cohesive Subgrade Soil Stabilized with Fly Ash, Gypsum and Lime, Multiphysical Testing of Soils and Shales (BOOK), Editors: Laloui, L, Ferrari, A, 323-329.
- 2013, Chunguang, M, Xiangqin, W, Mass deposition, etching and sputtering effects of low energy N+Ion Irradiation on solid fly ash, Plasma Science and Technology, 15 (12):1232-1236.
- 2013, Elkady, TY, Al-Mahbashi, AM, Soil water characteristic curves of lime-treated highly expansive soils, Advances in unsaturated soils (BOOK), Editor(s): Caicedo, B, Murillo, C, Hoyos, L, Colmenares, JE, Berdugo, IR, 231-234.
- 2013, Verma, A, Shukla, M, Sahu, AK, APPLICATION OF FUZZY LOGIC TO VISUAL EXAMINATION IN THE ASSESSMENT OF SULPHATE ATTACK ON CEMENT BASED MATERIALS, International Journal of Fuzzy Logic Systems, 3 (2): 49-61.
- 2013, Cyr, M, Influence of supplementary cementitious materials (SCMs) on concrete durability, ECO-EFFICIENT CONCRETE Book Series: Woodhead Publishing Series in Civil and Structural Engineering, Edited by: PachecoTorgal, F; Jalali, S; Labrincha, J; John, VM, 42: 153-197.
- 2013, Aydin, S, Effects of fiber strength on fracture characteristics of normal and high strength concrete, PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 57(2): 191-200.
- 2012, Michels, J, Waldmann, D, Maas, S, Zurbes, A, Steel fibers as only reinforcement for flat slab construction - Experimental investigation and design, CONSTRUCTION AND BUILDING MATERIALS, 26(1): 145-155.
- 2012, Barauskas, I, Kaminskas, R, Influence of carbonated additives on Portland cement hydration in chloride environment, ADVANCES IN CEMENT RESEARCH, 24 (6): 365-372.
- 2012, Diab, AM, Awad, AEM, Elyamany, HE , Abd Elmoaty, AEM, Guidelines in compressive strength assessment of concrete modified with silica fume due to magnesium sulfate attack, CONSTRUCTION AND BUILDING MATERIALS, 36: 311-318.
- 2012, Zuo, XB , Sun, W, Li, H, Zhao, YK, Modeling of diffusion-reaction behavior of sulfate ion in concrete under sulfate environments, COMPUTERS AND CONCRETE, 10(1): 79-93.
- 2012, Zhang, FC , Fang, YH, Shen, DJ , Zhou, JK, Risk Assessment and Diagnostic Method of Sulfate Attack of Cement-based Material, ADVANCED BUILDING MATERIALS AND SUSTAINABLE ARCHITECTURE, PTS 1-4 Book Series: Applied Mechanics and Materials, 174-177: pp. 121-126.
- 2012, Turki, M , Zarrad, I, Bretagne, E, Queneudec, M, Influence of Filler Addition on Mechanical Behavior of Cementitious Mortar-Rubber Aggregates: Experimental Study and Modeling, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 24(11): 1350-1358.
- 2012, Tosun-Felekoglu, K , The effect of C(3)A content on sulfate durability of Portland limestone cement mortars, CONSTRUCTION AND BUILDING MATERIALS , 36: 437-447
- 2012, Liu, ZQ, Deng, DH, De Schutter, G, Yu, ZW, Chemical sulfate attack performance of partially exposed cement and cement plus fly ash paste, CONSTRUCTION AND BUILDING MATERIALS, 28(1): 230-237
- 2012, Binici, H, Kapur, S, Arocena, J, Kaplan, H, The sulphate resistance of cements containing red brick dust and ground basaltic pumice with sub-microscopic evidence of intra-pore gypsum and ettringite as strengtheners, CEMENT & CONCRETE COMPOSITES, 34(2): 279-287
- 2012, Harichane, K, Ghrici, M, Kenai, S, Effect of the combination of lime and natural pozzolana on the compaction and strength of soft clayey soils: a preliminary study, ENVIRONMENTAL EARTH SCIENCES,66(8): 2197-2205.
- 2012, Tangchirapat, W, Khamklai, S, Jaturapitakkul, C, Use of ground palm oil fuel ash to improve strength, sulfate resistance, and water permeability of concrete containing high amount of recycled concrete aggregates, MATERIALS & DESIGN, 41: 150-157.
- 2012, Zhou, CS, Li, KF, Pang, XY, Geometry of crack network and its impact on transport properties of concrete, CEMENT AND CONCRETE RESEARCH, 42(9): 1261-1272.
- 2012, Cihangir, F, Ercikdi, B, Kesimal, A, Turan, A, Deveci, H, Utilisation of alkali-activated blast furnace slag in paste backfill of high-sulphide mill tailings: Effect of binder type and dosage, MINERALS ENGINEERING, 30: 33-43.
- 2012, Vlahovic, MM, Jovanic, PB, Martinovic, SP, Boljanac, TD, Volkov-Husovic, TD, Quantitative evaluation of sulfur-polymer matrix composite quality, COMPOSITES PART B-ENGINEERING, 44(1): 458-466.
- 2012, Huang, J, Ma, BG, Li, XG, Jian, SW, Tan, HB, Microstructure and mechanical properties of poly (vinyl chloride) modified by silica fume/acrylic core-shell impact modifier blends, JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 27(5): 886-891.
- 2012, Uysal, M, The influence of coarse aggregate type on mechanical properties of fly ash additive self-compacting concrete, CONSTRUCTION AND BUILDING MATERIALS, 37: 533-540.
- 2012, Siddique, R, Kapoor, K, Kadri, EH, Bennacer, R, Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete, CONSTRUCTION AND BUILDING MATERIALS, 29: 270-278.
- 2012, Gencel, O, Koksal, F, Ozel, C, Brostow, W, Combined effects of fly ash and waste ferrochromium on properties of concrete, CONSTRUCTION AND BUILDING MATERIALS, 29: 633-640.
- 2012, Koksal, F, Gencel, O, Unal, B, Durgun, MY, Durability properties of concrete reinforced with steel-polypropylene hybrid fibers, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 19(1): 19-27.
- 2012, Gencel, O, Ozel, C, Filiz, M, Koksal, F, The relations between mechanical strengths and abrasive wear of concrete incorporating the hematite aggregate, INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 13(3): 235-243.
- 2012, Centonze, G, Leone, M, Aiello, MA, Steel fibers from waste tires as reinforcement in concrete: A mechanical characterization, CONSTRUCTION AND BUILDING MATERIALS, 36: 46-57.
- 2012, Gencoglu, M, Uygunoglu, T, Demir, F, Guler, K, Prediction of elastic modulus of steel-fiber reinforced concrete (SFRC) using fuzzy logic, COMPUTERS AND CONCRETE, 9(5): 389-402.
- 2012, Koksal, F, Gencel, O, Unal, B, Durgun, MY, Durability properties of concrete reinforced with steel-polypropylene hybrid fibers, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 19(1): 19-27.
- 2012, Kang, ST, Kim, JK, Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution, CONSTRUCTION AND BUILDING MATERIALS, 28(1): 57-65.
- 2012, Nili, M, Afroughsabet, V, Property assessment of steel-fibre reinforced concrete made with silica füme, CONSTRUCTION AND BUILDING MATERIALS, 28(1): 664-669.
- 2012, Glodkowska, W, Kobaka, J, THE MODEL OF BRITTLE MATRIX COMPOSITES FOR DISTRIBUTION OF STEEL FIBRES, JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 18(1): 145-150.
- 2012, Kang, ST, Kim, JK, The relation between fiber orientation and tensile behavior in an Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC), CEMENT AND CONCRETE RESEARCH, 41(10): 1001-1014.
- 2012, Seco, A, Ramirez, F, Miqueleiz, L, Urmeneta P, García B, Prieto, E, Oroz, V, Types of Waste for the Production of Pozzolanic Materials – A Review, INDUSTRIAL WASTE (BOOK), 141-150.
- 2012, Solanki1, P, Zaman, M, Microstructural and Mineralogical Characterization of Clay Stabilized Using Calcium-Based Stabilizers, Scanning Electron Microscopy (BOOK) Edited by Dr. Viacheslav Kazmiruk, 771-798.
- 2011, Kaminskas, R , Barauskas, I, INFLUENCE OF POZZOLANA ON C(4)AF HYDRATION AND THE EFFECTS OF CHLORIDE AND SULFATE IONS ON THE HYDRATES FORMED, CERAMICS-SILIKATY, 55(3): 261-267.
- 2011, Seco, A, Ramirez, F , Miqueleiz, L, Garcia, B , Prieto, E, The use of non-conventional additives in Marls stabilization, APPLIED CLAY SCIENCE, 51(4): 419-423.
- 2011, Ekici, BB , Aksoy, UT , Prediction of building energy needs in early stage of design by using ANFIS, EXPERT SYSTEMS WITH APPLICATIONS, 38(5): 5352-5358.
- 2011, Parmaksiz, A, Arikan, P, Vural, M, Yeltepe, E, Tukenmez, I, Ra-226, Th-232 AND K-40 RADIONUCLIDES ENHANCEMENT RATE AND DOSE ASSESSMENT FOR RESIDUES OF LIGNITE-FIRED THERMAL POWER PLANTS IN TURKEY, RADIATION PROTECTION DOSIMETRY, 147(4): 548-554.
- 2011, Hossain, KMA, Stabilized Soils Incorporating Combinations of Rice Husk Ash and Cement Kiln Dust, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 23(9): 1320-1327.
- 2011, Hossain, KMA, Mol, L, Some engineering properties of stabilized clayey soils incorporating natural pozzolans and industrial wastes, CONSTRUCTION AND BUILDING MATERIALS, 25(8): 3495-3501.
- 2011, Estabragh, AR, Beytolahpour, I, Javadi, AA, Effect of Resin on the Strength of Soil-Cement Mixture, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 23(7): 969-976.
- 2011, Turhan, S, Arikan, IH, Kose, A, Varinlioglu, A , Assessment of the radiological impacts of utilizing coal combustion fly ash as main constituent in the production of cement, ENVIRONMENTAL MONITORING AND ASSESSMENT, 177(1-4): 555-561.
- 2011, Kalkan, E , Impact of wetting-drying cycles on swelling behavior of clayey soils modified by silica füme, APPLIED CLAY SCIENCE, 52(4): 345-352.
- 2011, Harichane, K, Ghrici, M, Missoum, H, Influence of natural pozzolana and lime additives on the temporal variation of soil compaction and shear strength, FRONTIERS OF EARTH SCIENCE, 5(2): 162-169.
- 2011, Harichane, K, Ghrici, M, Kenai, S, Effect of curing time on shear strength of cohesive soils stabilized with combination of lime and natural pozzolana, INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 9(2): 90-96.
- 2011, Wang, DX, Wang, HX, Chen, WZ, Reinforcement Mechanism of Cement/lime-fly ash Treated Sediments as Road Construction Materials, ARCHITECTURE AND BUILDING MATERIALS, PTS 1 AND 2 Book Series: Applied Mechanics and Materials, Book Editor(s): Zhou, XJ, 99-100: 924-927.
- 2011, Wang, LF, Orthogonal Tests and Multi-element Linear Regression Analysis of Compressive Strength of Nanometer Silicon Cemented Soil, EQUIPMENT MANUFACTURING TECHNOLOGY AND AUTOMATION, PTS 1-3 Book Series: Advanced Materials Research, Editor(s): Chen, X, 317-319: 34-41.
- 2011, Liu, C, Shi, B, Zhou, J, Tang, CS, Quantification and characterization of microporosity by image processing, geometric measurement and statistical methods: Application on SEM images of clay materials, APPLIED CLAY SCIENCE, 54(1): 97-106.
- 2011, Sezer, A, Altun, S, Goktepe, BA, RELATIONSHIPS BETWEEN SHAPE CHARACTERISTICS AND SHEAR STRENGTH OF SANDS, SOILS AND FOUNDATIONS, 51(5): 857-871.
- 2011, Gencel, O, Kocabas, F, Gok, MS, Koksal, F, Comparison of artificial neural networks and general linear model approaches for the analysis of abrasive wear of concrete, CONSTRUCTION AND BUILDING MATERIALS, 25(8): 3486-3494.
- 2011, Gencel, O, Gok, MS, Brostow, W, Effect of metallic aggregate and cement content on abrasion resistance behaviour of concrete, MATERIALS RESEARCH INNOVATIONS, 15(2): 116-123.
- 2011, Yetgin, S, Cavdar, A, Abrasion Resistance of Cement Mortar with Different Pozzolanic Compositions and Matrices, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 23(2): 138-145.
- 2011, Gencel, O, Ozel, C, Filiz, M, Investigation on abrasive wear of concrete containing hematite, INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 18(1): 40-48.
- 2011, Turk, K, Karatas, M, Abrasion resistance and mechanical properties of self-compacting concrete with different dosages of fly ash/silica füme, INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 18(1): 49-60.
- 2011, Acebes, M, Molero, M, Segura, I, Moragues, A, Hernandez, MG, Study of the influence of microstructural parameters on the ultrasonic velocity in steel-fiber-reinforced cementitious materials, CONSTRUCTION AND BUILDING MATERIALS, 25(7): 3066-3072.
- 2011, Soulioti, DV, Barkoula, NM, Paipetis, A, Matikas, TE, Effects of Fibre Geometry and Volume Fraction on the Flexural Behaviour of Steel-Fibre Reinforced Concrete, STRAIN, 47(1): E535-E541.
- 2011, Kang, ST, Lee, BY, Kim, JK, Kim, YY, The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete, CONSTRUCTION AND BUILDING MATERIALS, 25(5): 2450-2457.
- 2011, Siddique, R, Khan, MI, Fly Ash, SUPPLEMENTARY CEMENTING MATERIALS Book Series: Engineering Materials, Book Author(s):Siddique, R, Khan, MI, 1-66.
- 2010, Kaminskas, R , Barauskas, I, THE INFLUENCE OF POZZOLANA TO THE TRICALCIUM ALUMINATE HYDRATION AND THE EFFECTS OF CHLORIDE IONS TO FORMED HYDRATES, CERAMICS-SILIKATY, 54(1): 47-52.
- 2010, Mashrei, MA, Abdulrazzaq, N , Abdalla, TY, Rahman, MS, Neural networks model and adaptive neuro-fuzzy inference system for predicting the moment capacity of ferrocement members, ENGINEERING STRUCTURES, 32(6): 1723-1734.
- 2010, Huang, JC , Using Fuzzy Neural Network to Explore the Effect of Internet on Quality of Life, COMPUTATIONAL COLLECTIVE INTELLIGENCE: TECHNOLOGIES AND APPLICATIONS, PT II Book Series: Lecture Notes in Artificial Intelligence, 6422: 402-410.
- 2010, Brai, M, Casaletto, MP, Gennaro, G, Marrale, M, Schillaci, T , Tranchina, L, Degradation of stone materials in the archaeological context of the Greek-Roman Theatre in Taormina (Sicily, Italy), APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 100(3): 945-951
- 2010, Bonakdar, A, Mobasher, B, Multi-parameter study of external sulfate attack in blended cement materials, CONSTRUCTION AND BUILDING MATERIALS , 24(1): 61-70
- 2010, Al-Mukhtar, M, Lasledj, A, Alcover, JF, Behaviour and mineralogy changes in lime-treated expansive soil at 20 degrees C, APPLIED CLAY SCIENCE, 50(2): 191-198.
- 2010, Turhan, S, Arikan, IH, Yucel, B, Varinlioglu, A, Kose, A, Evaluation of the radiological safety aspects of utilization of Turkish coal combustion fly ash in concrete production, FUEL, 89(9): 2528-2535.
- 2010, Guneyli, H, Influence of Afsin-Elbistan highly limy fly ash on engineering behavior of a cohesive soil, SCIENTIFIC RESEARCH AND ESSAYS, 5(11): 1307-1316.
- 2010, Kashiwakura, S, Takahashi, T, Maekawi, H, Nagasaka, T, Application of B-11 MAS-NMR to the characterization of boron in coal fly ash generated from Nantun coal, FUEL, 89(5): 1006-1011.
- 2010, Suneel, M, Kwon, J, Im, JC, Jeon, CW, Long-Term Consolidation and Strength Behavior of Marine Clay Improved with Fly Ash, MARINE GEORESOURCES & GEOTECHNOLOGY, 28(2): 105-114.
- 2010, Orejarena, L, Fall, M, The use of artificial neural networks to predict the effect of sulphate attack on the strength of cemented paste backfill, BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 69(4): 659-670.
- 2010, Abdelkader, SM, Pozo, ER, Terrades, AM, Evolution of microstructure and mechanical behavior of concretes utilized in marine environments, MATERIALS & DESIGN, 31(7): 3412-3418.
- 2010, Chalee, W, Ausapanit, P, Jaturapitakkul, C, Utilization of fly ash concrete in marine environment for long term design life analysis, MATERIALS & DESIGN, 31(3): 1242-1249.
- 2010, Siddique, R, Khatib, JM, Abrasion resistance and mechanical properties of high-volume fly ash concrete, MATERIALS AND STRUCTURES, 43(5): 709-718.
- 2010, Sivaraja, M, Kandasamy, Velmani, N, Pillai, MS, Study on durability of natural fibre concrete composites using mechanical strength and microstructural properties, BULLETIN OF MATERIALS SCIENCE, 33(6): 719-729.
- 2010, Nili, M, Afroughsabet, V, Combined effect of silica fume and steel fibers on the impact resistance and mechanical properties of concrete, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 37(8): 879-886.
- 2010, de Carvalho, MRP, Fairbairn, EDR, Toledo, RD, Cordeiro, GC, Hasparyk, NP, Influence of steel fibers on the development of alkali-aggregate reaction, CEMENT AND CONCRETE RESEARCH, 40(4): 598-604.
- 2010, Sivaraja, M, Kandasamy, S, Thirumurugan, A, Mechanical strength of fibrous concrete with waste rural materials, JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 69(4): 308-312.
- 2009, Chan, APC, Chan, DWM, Yeung, JFY, Overview of the Application of "Fuzzy Techniques" in Construction Management Research, JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT-ASCE, 135(11): 1241-1252
- 2009, Saridemir, M , Predicting the compressive strength of mortars containing metakaolin by artificial neural networks and fuzzy logic, ADVANCES IN ENGINEERING SOFTWARE, 40(9): 920-927
- 2009, Topcu, IB, Boga, AR , Hocaoglu, FO, Modeling corrosion currents of reinforced concrete using ANN, AUTOMATION IN CONSTRUCTION, 18(2): 145-152
- 2009, Tangchirapat, W, Jaturapitakkul, C, Kiattikomol, K, Compressive Strength and Expansion of Blended Cement Mortar Containing Palm Oil Fuel Ash, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 21(8): 426-431
- 2009, Lukschova, S, Prikryl, R, Pertold, Z, Petrographic identification of alkali-silica reactive aggregates in concrete from 20th century bridges, CONSTRUCTION AND BUILDING MATERIALS, 23(2): 734-741
- 2009, Gurten, AA, Bayol, E, Kayakirilmaz, K, Erbil, M, Influence of polyvinylpyrrolidone on rebar corrosion in sulphate solution, STEEL AND COMPOSITE STRUCTURES, 9(1): 77-87.
- 2009, Kalkan, E, Effects of silica fume on the geotechnical properties of fine-grained soils exposed to freeze and thaw, COLD REGIONS SCIENCE AND TECHNOLOGY, 58(3): 130-135.
- 2009, Kalkan, E, Influence of silica fume on the desiccation cracks of compacted clayey soils, APPLIED CLAY SCIENCE, 43(3-4): 296-302.
- 2009, Silitonga, E, Levacher, D, Mezazigh, S, Effects of the use of fly ash as a binder on the mechanical behaviour of treated dredged sediments, ENVIRONMENTAL TECHNOLOGY, 30(8): 799-807.
- 2009, Maatta, J, Hellstedt, M, Kuisma, R, Kymalainen, HR, Mahlberg, R, Sjoberg, AM, Effects of chemical and mechanical wearing on the cleanability and surface properties of traditional and new surface materials in cattle barns - a laboratory study, BIOSYSTEMS ENGINEERING, 103(4): 464-473.
- 2009, Kymalainen, HR, Kuisma, R, Maatta, J, Sjoberg, AM, Assessment of cleanness of environmental surfaces in cattle barns and piggeries, AGRICULTURAL AND FOOD SCIENCE, 18(3-4): 268-282.
- 2009, Aiello, MA, Leuzzi, F, Centonze, G, Maffezzoli, A, Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength, WASTE MANAGEMENT, 29(6): 1960-1970.
- 2009, Atis, CD, Karahan, O, Properties of steel fiber reinforced fly ash concrete, CONSTRUCTION AND BUILDING MATERIALS, 23(1): 392-399.
- 2009, Xu, BW, Shi, HS, Correlations among mechanical properties of steel fiber reinforced-concrete, CONSTRUCTION AND BUILDING MATERIALS, 23(12): 3468-3474.
- 2008, Bassuoni, MT , Nehdi, ML, Neuro-fuzzy based prediction of the durability of self-consolidating concrete to various sodium sulfate exposure regimes, COMPUTERS AND CONCRETE, 5(6): 573-597.
- 2008, Bassuoni, MT, Nehdi, ML, Neuro-fuzzy based prediction of the durability of self-consolidating concrete to various sodium sulfate exposure regimes, COMPUTERS AND CONCRETE, 5(6): 573-597
- 2008, Topcu, IB, Saridemir, M, Prediction of rubberized concrete properties using artificial neural network and fuzzy logic, CONSTRUCTION AND BUILDING MATERIALS, 22(4): 532-540.
- 2008, Topcu, IB, Saridemir, M, Prediction of rubberized mortar properties using artificial neural network and fuzzy logic, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 199(1-3): 108-118
- 2008, Topcu, IB, Saridemir, M , Prediction of mechanical properties of recycled aggregate concretes containing silica fume using artificial neural networks and fuzzy logic, COMPUTATIONAL MATERIALS SCIENCE, 42(1): 74-82
- 2008, Topcu, IB, Saridemir, M, Prediction of compressive strength of concrete containing fly ash using artificial neural networks and fuzzy logic, COMPUTATIONAL MATERIALS SCIENCE, 41(3): 305-311
- 2008, 31. Shehata, MH, Adhikari, G, Radornski, S, Long-Term Durability of Blended Cement Against Sulfate Attack, ACI MATERIALS JOURNAL, 105(6): 594-602
- 2008, Guerrero, A, Goni, S, Lorenzo, MP, Long term durability at 40 degrees C of ecoefficient belite cement-mortar exposed to sulfate attack, ADVANCES IN CEMENT RESEARCH, 20(4): 139-144
- 2008, Zhang, WH, Xi, WY, Wang, BT, Hong, BN, Test study of high liquid limit clay modified by quick lime used as sub-grade material, JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 15: 126-130.
- 2008, Kalkan, E, Bayraktutan, MS, Geotechnical evaluation of Turkish clay deposits: a case study in Northern Turkey, ENVIRONMENTAL GEOLOGY, 55(5): 937-950.
- 2008, Goktepe, AB, Sezer, A, Sezer, GI, Ramyar, K, Classification of time-dependent unconfined strength of fly ash treated clay, CONSTRUCTION AND BUILDING MATERIALS, 22(4): 675-683.
- 2008, Karahan, O, Tanyildizi, H, Atis, CD, An artificial neural network approach for prediction of long-term strength properties of steel fiber reinforced concrete containing fly ash, JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 9(11): 1514-1523.
- 2008, Uygunoglu, T, Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete, MATERIALS AND STRUCTURES, 41(8): 1441-1449.
- 2007, Topcu, IB, Bilir, T, Effects of slag fineness on durability of mortars, JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 8(11): 1725-1730
- 2007, Hossain, KMA (Hossain, K. M. A.); Lachemi, M (Lachemi, M.); Easa, S, Stabilized soils for construction applications incorporating natural resources of Papua new Guinea, RESOURCES CONSERVATION AND RECYCLING, 51(4): 711-731.
- 2007, Gross, M, Soulard, M, Caullet, P, Patarin, J, Saude, I, Synthesis of faujasite from coal fly ashes under smooth temperature and pressure conditions: A cost saving process, MICROPOROUS AND MESOPOROUS MATERIALS, 104(1-3):67-76.
- 2007, Guney, Y, Sari, D, Cetin, M, Tuncan, M, Impact of cyclic wetting-drying on swelling behavior of lime-stabilized soil, BUILDING AND ENVIRONMENT, 42(2): 681-688.
Tamamlanmış Araştırma Projeleri (10 adet)- 2015, E.Ü. Bilimsel Araştırma Projesi (11-MUH-33), G. İnan Sezer, C. Yüksel, Uçucu kül, silis dumanı ve metakaolin içeren harçların sülfat direnci,Yürütücü.
- TÜBİTAK Kariyer Projesi (107M607), S. Altun, G.İ. Sezer, M. Kuruoğlu, Çelik Endüstrisi Atıklarının İnşaat Sektöründe Değerlendirilmesi, 2012 -Araştırmacı
- TÜBİTAK Araştırma Projesi (107M345), Ş. Yazıcı, G.İ. Sezer, Farklı dayanım seviyelerindeki betonlarda beton örtü tabakası kalınlığının, yüksek sıcaklık seviyesinin ve etki süresinin donatı aderansına etkisi, 2010-Araştırmacı
- E.Ü. Bilimsel Araştırma Projesi (2006/Müh/021), K. Ramyar, G.İ. Sezer, Kalker ve klinker özelliklerinin kalkerli çimentonun sülfat direncine etkisi, 2008- Araştırmacı
- EBİLTEM Araştırma Projesi (2006/BIL/001), S. Altun, A.B. Göktepe, K.Ramyar, A. Sezer, G.İ. Sezer, Yol Üstyapısında, Zemin Tabakalarında ve Betonda Kullanım Açısından Granüler Malzeme Mezoyapısının Görüntü İşleme Algoritmaları Kullanılarak Modellenmesi, 2007- Araştırmacı
- EBİLTEM Araştırma Projesi (2006/BIL/002), K.Ramyar, G.İ. Sezer, Kalker ve klinker özelliklerinin kalkerli çimento özelliklerine etkisi, 2007- Araştırmacı
- TÜBİTAK Araştırma Projesi (104I076), K.Ramyar, G.İ. Sezer, Kalker ve klinker özelliklerinin kalkerli çimento özelliklerine etkisi, 2007-Araştırmacı
- TÜBİTAK Hızlı Destek Projesi (106M523), Ş. Yazıcı, G.İ. Sezer, Çelik lifli betonların darbe direncine agrega max. boyutunun ve kökeninin etkisi, 2007- Araştırmacı
- E.Ü. Bilimsel Araştırma Projesi (2003/Müh/032), G.İ. Sezer, K.Ramyar, Kalker ve klinker özelliklerinin kalkerli çimento özelliklerine etkisi, 2006-Yürütücü
- E.Ü. Bilimsel Araştırma Projesi (2001/Müh/026), Ş.Yazıcı, G.İnan, Değişik Tip Çimentoların ve Bunlardan Üretilen Betonların Sülfat Direnci, 2003- Araştırmacı
Yöneterek Sonuçlandırdığı Öğrenci Tezleri (1 adet)- Yüksek Lisans, 2011, Çelik endüstrisi atıklarının beton özelliklerine etkisi, Mert GÜLDEREN